LINEARlight FLEX Protect

  • 软性、可裁剪LED灯带
  • 防护级别:IP67
  • 可调光
  • 色温细分
  • 高度耐紫外线
  • 防盐雾
  • 高性能硅,超长寿命、超灵活
  • 时尚设计
  • 通过预安装连接器简单连接
  • LINEARlight Track LT


Sort by:
LED 光色
蓝色 12 lm/W 72.00 W 9900 mm


LINEARlight FLEX Protect时尚创新的设计及其高规格使其成为您需要自由创造专业和定制的装饰照明装置时的理想解决方案。 这种柔性可切割的LED灯带提供可调光的白光,具有IP67防护等级,可抵抗紫外线和盐雾,因此非常适合用于路径照明,复杂结构和标牌的背光照明以及室内 诸如墙壁一体化和海湾照明等应用。 通过预安装的连接器连接起来非常简单,而且每根FLEX胶带的背面都装有胶带。 LINEARlight FLEX Protect与CONNECTsystem LF-PROTECT和LINEARlight Track LT兼容。
  • 装饰应用
  • 墙壁整合
  • 复杂结构的背光照明
  • 道路照明
  • 招牌
Ecodesign regulation information:
  • This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015. The contained light source is intended for use in applications requiring high-quality coloured light.
  • Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
  • In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
    In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified.
  • Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
    Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.