BackLED and BoxLED mounting profiles

  • 通用安装造型,适合单面或双面灯箱
  • 总长:2,000 mm
  • 可以方便地剪裁成任意长度
  • 通过自攻螺丝或空心铆钉快速方便安装
  • 无需工具,快速方便卡入安装LED模组
  • 紧固耐用的铝质支架



BackLED安装型材长2000毫米,通用于单面或双面灯箱。 如果您是照明设计师或照明规划师,希望创造引人注目和难忘的标志,使用BackLED模块制作广告或刻字,或背光灯箱,可以帮助您快速轻松地实现目标。 这些坚固的铝制安装型材可以缩短到任意长度,并且易于使用自攻螺丝或流行铆钉进行安装。 它们适用于BackLED S / M / L Plus G15和BackLED M / L Basic G15。
  • 广告和文字
Ecodesign regulation information:
  • This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
  • Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
  • In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
    In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified.
  • Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
    Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.