LINEARlight ADVANCED Overall Module
产品参数
| 产品 |
|
|
|
|
|
数据参数表 | ||
|---|---|---|---|---|---|---|---|---|
|
|
LR14A-W2F-840-L70
|
4000 K | >80 | 350 lm | 4.70 W | 285.1 mm |
全系列产品介绍
让这个面向设计的完整模块为您的专业照明装置带来一丝风格。 安装简单，使用寿命长。 您可以轻松地连接模块，根据需要创建光带，并使用一个电子控制装置最多运行10个模块，而LINEARlight ADVANCED整体模块的低轮廓（13 mm）可在多个空间中使用。 其铝制外壳不仅看起来不错，而且还确保充分散热。 每个模块都配有14个LED和集成光学元件，可提供高达1250 lm / m（可与T5荧光灯，8 W，13 W相媲美）的可调光质量光通量。 LINEARlight ADVANCED Overall Module与一系列附件兼容，包括LINEARlight POWER和ECO Overall Module，这些附件可以在设计和系统创建方面给予您极大的自由。 这是特别好使用在货架照明和海湾照明。
应用领域
- 暗槽照明
- 储柜和碗柜照明
Ecodesign regulation information:
- This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
- Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
- In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified. - Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.