OPTOTRONIC Intelligent DALI LT2
产品特点
- 电源电压:220至240 V
- 线路频率:0 Hz | 50 Hz | 60 Hz
- 线路电压:198至264 V
- 安全性能符合 EN 61347-1、61347-2-3、 61347-2-13、62384 等标准的规定
- RI抑制:符合EN 55015/CISPR 15
- 网侧谐波,符合标准 EN 61000-3-2 的规定
- 抗干扰性能符合 EN 61547 标准
产品优势
- 多功能 DALI 窗驱动器,具备灵活的输出特性
- 得益于热管理和智能控制功能,系统得了可靠的保护
- 具备三级走廊功能,可以非常方便地在走廊和卫生间中使用
- Touch DIM 应用:可通过按钮和传感器进行方便的控制
- Touch DIM 具备高能源效率,残余光线充足时,可以自动关灯
- 具备直流检测(0 Hz,脉冲直流)和可切换开关,适用于应急设施(符合标准 EN 60598-2-22 和 IEC 61347-2-13 附录 J 的要求)
- 具备能耗和工作时数反馈功能(适用于智能电网)
- 具备自动恒定流明输出设置功能,理想适用于相关楼宇(执行标准: EPBD/BREEAM/LEED )合
产品参数
产品 |
|
|
|
|
|
数据参数表 | ||
---|---|---|---|---|---|---|---|---|
OTi DALI 15/220
240/1A0 LT2
|
7.5 54 V | 150 1050 毫安 | 95.0 mm | 53.0 mm | 30.0 mm | |||
OTi DALI 25/220
240/700 LT2
|
12 54 V | 180 700 毫安 | 103.0 mm | 67.0 mm | 29.5 mm | |||
OTi DALI 35/220
240/1A0 LT2
|
15 54 V | 350 1050 毫安 | 103.0 mm | 67.0 mm | 29.5 mm | |||
OTi DALI 50/220
240/1A4 LT2 FAN
|
15 54 V | 600 1400 毫安 | 110.0 mm | 75.0 mm | 25.0 mm |
全系列产品介绍
应用领域
- 按照 IEC 61347-2-13 标准附录 J 的要求安装在应急照明系统
- 适用于可灵活设置电流的灯具(DALI、CLO、 LEDset)
- 适用于室内 SELV 设施
- 适用于保护等级 I 和 II 的灯具
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.