BackLED TW Plus G2

产品特点
  • 与软性电缆连接
  • 光色:动态2700至6500 K
  • 卓越坚固的封装
  • CE 认证
产品优势
  • 灵活可编程氛围照明(与照明管理系统连接)
  • 通过广角配光,实现均匀大面积背光照明
  • 用M3螺丝简单固定
  • 无紫外和红外光,保护展品
  • 一致性好的白色光(标准颜色偏差与 SDCM 相当: < 3)
  • 5年质保
设备/配件
  • 提供七种类型的OPTOTRONIC24 V电源
  • BoxLED 安装支架

Products

Sort by:
Product
LED 光色
模块LED颗粒数
单个 LED 模块的光通量
单个 LED 模块的标称功率
发光效率
产品数据表
BA-TW-PL 827-865 G2
白色 12 460 lm 4.8 W 95.8 lm/W

Information about Family

BackLED TW Plus G2采用坚固的封装IP66保护的模块,通过柔性电缆连接,为您提供一致的白光(SDCM < 3),不含紫外线和红外线。 这样可以保护灯光,使BackLED TW Plus G2成为博物馆中的显示照明和画廊照明的理想选择。 它也适用于日光模拟,水疗,商店照明和办公室照明 - 如果在封闭的灯箱或通道字母内,您可以将其永久安装在室外。 非常广角的光学元件使BackLED TW Plus G2成为大面积均匀背光的理想选择,并将其与灯光管理系统(LMS)结合使用,可以灵活地设置照明氛围。 该模块与OPTOTRONIC 24 V电源范围和BoxLED安装支架BX-MP中的几个选项相匹配。
应用领域
  • 日光模拟
  • 温泉浴场
  • 商店
  • 办公室
  • 博物馆、艺术画廊
  • 用于密闭灯箱或轮廓文字的永久户外使用

参考资料/链接
For more information on the multi-level guarantee and the terms and conditions of the guarantee visit www.osram.com/system-guarantee

Ecodesign regulation information:
  • This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
  • Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
  • In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
  • Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
    Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

下载

Tools

Flex Configurator
Flex Configurator
Use our free flex configurator tool to calculate your ideal lighting solution Try it out now