QTi 3X14/24 DIM
产品优势
- 直流电和交流电具有相同的光通量
- 采用移动传感器,光源开启操作更完美
- 汞齐灯调光,无闪烁,也不会缩短使用寿命
- 采用断流技术,实现高效率
- 更换光源后自动重启
- 由于极低待机能耗,ECG符合MINERGIE标准
- 可配置应急电源特性
应用领域
- 适用于应急装置
- 工业
- 开放式大办公室、走廊和储藏室
- 公共建筑
- 适合I类保护的灯具
技术数据
电参数
交流输入电压
198 264 V
标称电压
220 240 V
市电频率
50 60 Hz
直流输入电压
154 276 V
Maximum output power
3 x 24 W
Efficiency in full-load
92 %
工作频率
40 100 kHz
使用10A过载保护器时最大ECG连接数
12
16 A 断路器上的 ECG 最大数量
19
浪涌电流
35 安培
光参数
启动时间
0.6 s
尺寸和重量
长度
360.0 mm
宽度
40.0 mm
高度
21.0 mm
安装孔距, 长度
350.0 mm
产品重量
394.00 g
电缆截面积,输出端
0.5 1.5 / 0.5 1.0 mm²
输入端线缆截面
0.5 1.5 / 0.5 1.0 mm²
温度
环境温度范围
+10 +50 °C
相对湿度
5 85 %
寿命
ECG 寿命
100000 h
更多的产品数据
Suitable for lamp power (3 lamps)
14 24 W
功能
调光界面
1 10 V
调光范围
1 100 %
可调光
是
过热保护
在T > 75 °C 的温度系数点降低功率和切断电源
适合带防护等级的固件
I
灯泡寿命结束安全关闭
EOL T.2
Intended for no-load operation
否
至灯/LED 模块的最大电缆长度
1.0 m
认证与标准
认证标志 认证
VDE / VDE-EMC / EL / EAC / RCM / CCC
标准
根据 EN 55015; EN 55022标准/根据 EN 61547标准/根据 EN 61000-3-2标准
防护等级
I
EEI 能效标识
A1 BAT
防护类型
IP20
物流数据
商品编码
850410809000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
14-04-2022
Primary Article Identifier
4008321069719
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
65e455f2-fb46-424e-8f4d-fce5b895f694
包装信息
EAN |
单位 |
件 |
尺寸 |
重量 |
音量 |
---|---|---|---|---|---|
4008321069719 |
UNV
| 1 | |||
4008321069924 |
VS
| 20 | 384mm x 90mm x 237mm | 8672.00g | 8.19dm³ |
下载更多信息
全系列产品介绍
产品特点
- 通过1至10 V接口控制
- 电源电压:220至240 V
- 线路频率:0 Hz | 50 Hz | 60 Hz
- 线路电压:198至264 V
- 调光范围:1至100 %光通量
- 灯启动:0.6 s内
- 使用寿命:> 100,000 h(Tc 时T = 65 °C)
- 故障灯及使用寿命已到期的灯自动关闭(EoL T.2)
- 能源效率指数EEI:A1 BAT
- 超温保护:高tc温度下的热管理
- 安全性:符合EN 61347-2-3
- 灯工作:符合EN 60929
- RI抑制:符合EN 55015:2006+A1:2007+A2:2009/CISPR 15
- 网侧谐波,符合标准 EN 61000-3-2 的规定
- 抗干扰性能符合 EN 61547 标准
Ecodesign regulation information:
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
产品参数
产品 |
|
|
|
|
|
数据参数表 | ||
---|---|---|---|---|---|---|---|---|
QTi 1X14/24 DIM
|
21.0 mm | 30.0 mm | 是 | 1 10 V | 1 100 % | |||
QTi 2X14/24 DIM
|
21.0 mm | 30.0 mm | 是 | 1 10 V | 1 100 % | |||
QTi 2X21/39 DIM
|
21.0 mm | 30.0 mm | 是 | 1 10 V | 1 100 % | |||
QTi 3X14/24 DIM
|
21.0 mm | 40.0 mm | 是 | 1 10 V | 1 100 % | |||
QTi 4X14/24 DIM
|
21.0 mm | 40.0 mm | 是 | 1 10 V | 1 100 % |