LF05A-B3-P
.jpg)
.jpg)
产品优势
- 超长无缝光带
- 灵活的可切割式模块带来了极大的设计自由性
- 高性能硅，超长寿命、超灵活
- 通过预安装连接器简单连接
- 非凡设计、高品质材料
- 通过可选CONNECTsystem实现免工具连接
- 得益于背侧自粘胶带，可以方便地安装在各种光滑表面上
应用领域
- 暗槽照明
- 墙壁整合
- 扶手和走廊
- 机器照明
- 道路照明
- 招牌
- 适合户外使用
设备/配件
- 简化了可选匹配连接系统的连接
- 采用可选细长滑轨系统，可以快速完成安装过程
- 可与24 V OPTOTRONIC电子镇流器完美搭配使用
技术数据
电参数
标称电压
24.0 V
电流类型
DC
每米标称功率
7.3 W
额定功率
72.00 W
输入电压范围
23…25 V
Accidental reverse input voltage protection up to
25 V
光度数据
LED 光色
蓝色
标称主波长
467 nm
每米光通量
80 lm
可用总光通量
840 lm
发光效率
12 lm/W
色彩匹配标准偏差
≤3,5 sdcm
EN 12464-1 标准光色
蓝色
光参数
LED pitch
20.0 mm
光束角
120 °
启动时间
< 0.5 s
升温时间 (60 %)
0.00 s
LED 模块信息
每米 LED 数量
50
最小单元LED颗粒数
5
Maximum operable length [calc.]
9900 mm
尺寸和重量
长度
9900 mm
长度 – 最小单元
100.0 mm
宽度
11.1 mm
高度
4.80 mm
接线长度
500.0
产品重量
800.00 g
输入端线缆截面
0.34 mm²
颜色和材料
面板材质
Silicone
灯体材料
Silicone
温度
符合 IEC 62717 的性能温度
25 °C
工作温度范围
-30…75 °C
环境温度范围
-20…+50 °C
仓储温度范围
-40…+85 °C
寿命
额定灯泡寿命
50000 h
标称灯泡寿命
50000 h
标称寿命周期末光通维持率
0.70
点亮次数
15000
更多的产品数据
产品说明
Modules perfectly matched to OSRAM OPTOTRONIC LED drivers (see relevant table)/对当前光测定数据和重要的安全、安装和应用的信息,请查看www.osram.com/led-systems/所有技术参数均适用于全部模组。由于发光二极管制造过程的复杂性, LED光色、寿命等标称参数值均为统计数值, 而不对应个体产品, 个体产品的实际参数值可能与标称值存在差异。
功能
Lowest bending radius
50 mm
With connection set
否
With end piece
否
认证与标准
能耗
80 kWh/1000h
标准
CE
防护类型
IP67
物流数据
商品编码
85395100000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
18-04-2022
Primary Article Identifier
4008321617804
Declaration No. in SCIP database
In work
包装信息
EAN |
单位 |
件 |
尺寸 |
重量 |
音量 |
|---|---|---|---|---|---|
| 4008321617804 |
FS
| 1 | 353mm x 349mm x 32mm | 1279.00g | 3.94dm³ |
| 4008321617811 |
VS
| 8 | 366mm x 380mm x 286mm | 8971.00g | 39.78dm³ |
下载更多信息
Accessories optional
Modul-ECG Combination
OT 120/220-240/24 DIM P
LED 模块的最大长度（由 ECG 确定）
16.5 m
OT 240/220-240/24 DIM P
LED 模块的最大长度（由 ECG 确定）
33 m
OT 75/220-240/24 E
LED 模块的最大长度（由 ECG 确定）
10.3 m
全系列产品介绍
LINEARlight FLEX Protect ADVANCED是一种非常长的，灵活的可切割的LED 灯带，LED光通量高达390流明/米，防护等级达到IP67。 它为您提供可调光，一致的优良的白光，抗盐雾和紫外线，其结构由高性能硅胶制成，令人难以置信的灵活，耐用，适合在户外使用。 LINEARlight FLEX Protect ADVANCED的非凡设计，其长度非常长，可以创建无缝的光带，并提供出色的设计自由度，特别是在设计海湾照明，标牌，墙壁集成或路径和扶手灯时。 模块很容易连接，特别是如果您使用可选的CONNECT系统，并且通常只需使用背面的粘合条即可安装。 如果您正在设计原创的建筑或商业LED照明，LINEARlight FLEX Protect ADVANCED可能正是您所需要的。
产品特点
- 软性、可裁剪LED灯带
- 防护级别：IP67
- 纯白色 (3.5 SDCM)
- 防盐雾
Ecodesign regulation information:
- This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015. The contained light source is intended for use in applications requiring high-quality coloured light.
- Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
- In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified. - Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
产品参数
| 产品 |
|
|
数据参数表 | ||
|---|---|---|---|---|---|
|
|
LF05A-B3-P
|
蓝色 | 80 lm |