LINEARlight FLEX Diffuse Side
产品参数
| 产品 |
|
|
数据参数表 | ||
|---|---|---|---|---|---|
|
LFD400S-G1-830-06
|
3000 K | 450 lm | ||
|
|
LFD400S-G1-835-06
|
3500 K | 450 lm | ||
|
|
LFD400S-G1-840-06
|
4000 K | 450 lm | ||
|
|
LFD400S-G1-850-06
|
5000 K | 430 lm | ||
|
|
LFD400S-G1-865-06
|
6500 K | 380 lm | ||
|
|
LFD400S-G1-924-06
|
2400 K | 340 lm | ||
|
|
LFD400S-G1-927-06
|
370 lm | |||
|
|
LFD400S-G1-935-06
|
3500 K | 390 lm | ||
|
|
LFD400S-G1-940-06
|
4000 K | 390 lm | ||
|
|
LFD400S-G1-965-06
|
6500 K | 380 lm | ||
|
|
LFD600S-G1-840-06
|
4000 K | 680 lm | ||
|
|
LFD600S-G1-850-06
|
5000 K | 620 lm | ||
|
|
LFD600S-G1-865-06
|
6500 K | 560 lm | ||
|
|
LFD600S-G1-924-06
|
2400 K | 510 lm | ||
|
|
LFD600S-G1-927-06
|
550 lm | |||
|
|
LFD600S-G1-935-06
|
3500 K | 570 lm |
全系列产品介绍
遵循您的光线灵感，并使用专为专业和工业照明应用设计的产品LINEARlight FLEX DIFFUSE 400 侧发光系列 轻松构建定制和有机形状的灯具。 这种灵活的可切割的LED灯条可以使漫射光无明显的斑点，并且可以使用单个电源供电，最多可以运行6米。 采用高性能硅胶制成，能够抵抗灰尘，水分，盐雾和紫外线，因此无论您是制作定制的家用灯具还是制作标牌和照明广告，都可以在室内或室外使用。 这是理想的建筑照明和集成，例如在扶手，以及室内或外墙照明。 LINEARlight FLEX DIFFUSE 400 side采用24 V技术，便于尺寸调整，并可通过PWM技术进行调光。
应用领域
- 招牌和灯光广告
Ecodesign regulation information:
- This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
- Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
- In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified. - Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.