OT FIT 35/220 240/350 D NFC L
技术数据
电参数
标称电压
220 240 V
市电频率
0/50/60 Hz Hz
交流输入电压
198 264 V
直流输入电压
176 276 V
Current set
NFC
功率因数 λ
0.65C...0.97
Efficiency in full-load
91 %
设备功率损耗
4.0 W
浪涌电流
30 安培
使用10A过载保护器时最大ECG连接数
19
16 A 断路器上的 ECG 最大数量
30
25 A 断路器上的 ECG 最大数量
-
浪涌承受能力 (L/N-Ground)
2 kV
浪涌承受能力 (L-N)
1 kV
标称输出电压
54 216 V
标称输出电流
75 350 毫安
Default output current
75 毫安
输出纹波电流(100 Hz)
< 1 %
Output PSTLM
≤1
Output SVM
≤0.4
标称输出功率
6.1 35 W
Maximum output power
35 W
Galvanic isolation
Non isolated
U-OUT(工作电压)
< 250 V
Total harmonic distortion
< 10 %
Output current tolerance
±3 %
尺寸和重量
安装孔距, 长度
270.0 mm
产品重量
185.00 g
输入端线缆截面
0.5 1.5 mm²
电缆截面积,输出端
0.5 1.5 mm²
预留线缆长度, 输入端
8.0 9.0 mm
宽度
30.0 mm
高度
21.0 mm
长度
280.0 mm
预留线缆长度, 输出端
8.0 9.0 mm
颜色和材料
壳体材料
金属
温度
环境温度范围
-25 +60 °C
温度系数测试点最高温度
75 °C
故障时最高外壳温度
110 °C
仓储温度范围
-40 +85 °C
相对湿度
5 85 %
寿命
ECG 寿命
50000 / 100000 h
更多的产品数据
Encapsulated
否
功能
可调光
否
过热保护
自动可逆
过载保护
自动可逆
Short-circuit protection
自动可逆
标准空载符合
是
Intended for no-load operation
否
至灯/LED 模块的最大电缆长度
2.0 m
适合带防护等级的固件
I
Number of channels
1
适用于应急照明
是
Programming
Tuner4TRONIC Field App
是
Box programming
Yes
Tuner4TRONIC
是
认证与标准
认证标志 认证
CE / EL / VDE-ENEC / EAC / CCC / BIS / RCM
标准
根据 EN 61347-1标准/根据 EN 61347-2-13标准/根据 EN 62384标准/根据 EN 61000-3-2标准/根据 EN 61000-3-3标准/根据 EN 61547标准
防护类型
IP20
物流数据
商品编码
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
26-05-2023
Primary Article Identifier
4052899990166
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
76bfa7be-1a77-426d-8d9d-21bf10e67f82
包装信息
EAN |
单位 |
件 |
尺寸 |
重量 |
音量 |
---|---|---|---|---|---|
4052899990166 |
UNV
| 1 | 280mm x 30mm x 21mm | 220.00g | 0.18dm³ |
4052899990173 |
VS
| 20 | 309mm x 225mm x 78mm | 4595.00g | 5.42dm³ |
下载更多信息
Accessories optional
全系列产品介绍
产品特点
- 线路频率:0 Hz | 50 Hz | 60 Hz
- 电源电压:220至240 V
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
产品参数
产品 |
|
|
|
|
|
数据参数表 | ||
---|---|---|---|---|---|---|---|---|
OT FIT 35/220
240/350 D NFC L
|
54 216 V | 75 350 毫安 | 280.0 mm | 30.0 mm | 21.0 mm | |||
OT FIT 75/220
240/550 D NFC L
|
54 216 V | 125 550 毫安 | 280.0 mm | 30.0 mm | 21.0 mm |