OT 200/220-240/5A6 DIM P7
产品优势
- Easily current adjustment by potentiometer
- 较高的浪涌防护等级：最高10 kV
- 0…10 V dimming (minimum10%)
- High efficiency (up to 93%)
- Wide output voltage & current range for multiple applications
- Double isolation between primary/secondary sides (SELV)
- Over temperature protection
- IP rating: IP67 (Independent installation)
应用领域
- 街道和城区照明
- Industry lighting
- 适合I类保护的灯具
技术数据
电参数
标称电压
220…240 V
交流输入电压
195…264 V
标称电流
1.2 安培
市电频率
50…60 Hz
功率因数 λ
> 0.95
Total harmonic distortion
< 10 %
设备功率损耗
14 W
浪涌电流
65 安培
使用10A过载保护器时最大ECG连接数
2
16 A 断路器上的 ECG 最大数量
4
25 A 断路器上的 ECG 最大数量
7
浪涌承受能力 (L/N-Ground)
10 kV
浪涌承受能力 (L-N)
6 kV
标称输出功率
20…200 W
Maximum output power
200 W
Efficiency in full-load
93.5 %
标称输出电流
4.2 A...5.6 安培
Output current tolerance
±5 %
输出纹波电流（100 Hz)
< 5 %
Minimum output current
4.2 安培
Galvanic isolation
double/reinforced
标称输出电压
36...48 V
尺寸和重量
长度
167.0 mm
宽度
60.0 mm
高度
33.0 mm
安装孔距, 长度
199.0 mm
安装孔距, 宽度
45.8 mm
产品重量
750.00 g
输入端线缆截面
1.0 mm²
电缆截面积，输出端
1.0 mm²
预留线缆长度, 输入端
10 mm
温度
环境温度范围
-40…+55 °C
仓储温度范围
-40…+85 °C
温度系数测试点最高温度
90 °C
故障时最高外壳温度
110 °C
相对湿度
5…85 %
寿命
ECG 寿命
50000 h
功能
可调光
是
调光界面
0-10V
调光范围
10…100 %
适合带防护等级的固件
I
Short-circuit protection
是
标准空载符合
是
Intended for no-load operation
否
至灯/LED 模块的最大电缆长度
2.0 m
Number of channels
1
过载保护
是
认证与标准
防护类型
IP67
标准
根据 EN 55015标准/根据 EN 61000-3-2标准/根据 EN 61000-3-3标准/根据 EN 61347-1标准/根据 EN 61347-2-13标准/根据 EN 61547标准/Acc. to EN 60598-1 (ED.8)/根据 EN 62384标准
认证标志 – 认证
CCC / CE / ENEC 25 / IP67 / RCM / SELV / TISI
物流数据
商品编码
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
25-04-2022
Primary Article Identifier
4062172087278
Candidate List Substance 1
No declarable substances contained
Declaration No. in SCIP database
No declarable substances contained
包装信息
EAN |
单位 |
件 |
尺寸 |
重量 |
音量 |
|---|---|---|---|---|---|
| 4062172087278 |
UNV
| 1 | 750.00g | ||
| 4062172087285 |
VS
| 15 | 399mm x 289mm x 183mm | 11914.00g | 21.10dm³ |
下载更多信息
全系列产品介绍
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
产品参数
| 产品 |
|
|
|
|
数据参数表 | ||
|---|---|---|---|---|---|---|---|
|
OT 100/220-240/2A8 DIM P7
|
2A…2.8 安培 | 167.0 mm | 60.0 mm | 33.0 mm | ||
|
OT 150/220-240/4A2 DIM P7
|
3.1A...4.2 安培 | 188.0 mm | 60.0 mm | 33.0 mm | ||
|
|
OT 200/220-240/5A6 DIM P7
|
4.2 A...5.6 安培 | 167.0 mm | 60.0 mm | 33.0 mm |