OT 150/220-240/4A2 P7
产品优势
- Easily current adjustment by potentiometer
- 较高的浪涌防护等级：最高10 kV
- High efficiency (up to 93%)
- Wide output voltage & current range for multiple applications
- Double isolation between primary/secondary sides (SELV)
- Over temperature protection
- IP rating: IP67 (Independent installation)
应用领域
- 街道和城区照明
- Industry lighting
- 适合I类保护的灯具
技术数据
电参数
标称电压
220…240 V
交流输入电压
198…264 V
标称电流
0.85 安培
市电频率
50…60 Hz
功率因数 λ
> 0.95
Total harmonic distortion
< 5 %
设备功率损耗
10.5 W
浪涌电流
60 安培
使用10A过载保护器时最大ECG连接数
3
使用10A过载保护器时最大ECG连接数
-
16 A 断路器上的 ECG 最大数量
6
16 A 断路器上的 ECG 最大数量
-
25 A 断路器上的 ECG 最大数量
9
浪涌承受能力 (L/N-Ground)
10 kV
浪涌承受能力 (L-N)
6 kV
标称输出功率
105…150 W
Maximum output power
150 W
Efficiency in full-load
93.5 %
标称输出电压
36...48 V
U-OUT（工作电压）
60 V
标称输出电流
3.1A...4.2 安培
Output current tolerance
±5 %
Minimum output current
3.1 安培
Galvanic isolation
double/reinforced
尺寸和重量
长度
188.0 mm
宽度
60.0 mm
高度
35 mm
安装孔距, 长度
174.0 mm
产品重量
720.00 g
输入端线缆截面
1.0 mm²
电缆截面积，输出端
1.0 mm²
预留线缆长度, 输入端
10 mm
温度
环境温度范围
-40…+55 °C
仓储温度范围
-40…+85 °C
温度系数测试点最高温度
90 °C
故障时最高外壳温度
120 °C
寿命
ECG 寿命
50000 h
功能
可调光
否
适合带防护等级的固件
I
Intended for no-load operation
否
Control interface
0-10V
Number of channels
1
认证与标准
防护类型
IP67
标准
根据 EN 61347-1标准/根据 EN 61347-2-13标准/根据 EN 55015标准/根据 EN 61547标准/根据 EN 61000-3-2标准/根据 EN 61000-3-3标准/根据 EN 62384标准/Acc. to EN 60598-1 (ED.8)
认证标志 – 认证
CE / CCC / RCM / ENEC 25 / IP67 / SELV
物流数据
商品编码
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
09-06-2023
Primary Article Identifier
4062172087193
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
052df244-b982-485e-ac56-532e620701e3
包装信息
EAN |
单位 |
件 |
尺寸 |
重量 |
音量 |
|---|---|---|---|---|---|
| 4062172087193 |
UNV
| 1 | 720.00g | ||
| 4062172087209 |
VS
| 15 | 399mm x 264mm x 183mm | 11438.00g | 19.28dm³ |
下载更多信息
全系列产品介绍
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
产品参数
| 产品 |
|
|
|
|
数据参数表 | ||
|---|---|---|---|---|---|---|---|
|
OT 100/220-240/2A8 P7
|
2A…2.8 安培 | 167.0 mm | 60.0 mm | 35 mm | ||
|
|
OT 150/220-240/4A2 P7
|
3.1A...4.2 安培 | 188.0 mm | 60.0 mm | 35 mm | ||
|
OT 200/220-240/5A6 P7
|
4.2 A...5.6 安培 | 213.0 mm | 60.0 mm | 35 mm |