OT FIT 40/220 240/1A0 CS
技术数据
电参数
标称电压
220 240 V
市电频率
50/60 Hz
交流输入电压
198 264 V
Total harmonic distortion
< 10 %
功率因数 λ
0.98
Efficiency in full-load
90 %
设备功率损耗
4.9 W
保护导体电流
<0.7 毫安
浪涌电流
≤ 35 安培
使用10A过载保护器时最大ECG连接数
19
使用10A过载保护器时最大ECG连接数
11
16 A 断路器上的 ECG 最大数量
19
16 A 断路器上的 ECG 最大数量
31
25 A 断路器上的 ECG 最大数量
29
浪涌承受能力 (L/N-Ground)
2 kV
浪涌承受能力 (L-N)
1 kV
标称输出电压
25 42 / 30 42 V
U-OUT(工作电压)
60 V
标称输出电流
800 / 900 / 950 / 1050 毫安
Output current tolerance
±7.5 %
Default output current
1050 毫安
输出纹波电流(100 Hz)
< 5 %
Output PSTLM
≤1
Output SVM
≤0.4
标称输出功率
20 44.1 W
Maximum output power
44.1 W
Galvanic isolation
SELV
初级/次级电气隔离
SELV
Current set
DipSwitch
尺寸和重量
安装孔距, 长度
88.0 mm
安装孔距, 宽度
34.0 mm
产品重量
110.00 g
输入端线缆截面
0.5 1.5 mm²
电缆截面积,输出端
0.5 1.5 mm²
预留线缆长度, 输入端
7 8 mm
预留线缆长度, 输出端
7 8 mm
长度
97.0 mm
高度
29.5 mm
宽度
43.0 mm
颜色和材料
壳体材料
塑料
温度
环境温度范围
-20 +50 °C
温度系数测试点最高温度
80 °C
故障时最高外壳温度
110 °C
仓储温度范围
-20 80 °C
相对湿度
5 85 %
寿命
ECG 寿命
50000 h
更多的产品数据
后继 EAN
4052899435650
功能
可调光
否
过热保护
自动可逆
过载保护
自动可逆
Short-circuit protection
自动可逆
标准空载符合
是
Intended for no-load operation
否
至灯/LED 模块的最大电缆长度
2.0 m
适合带防护等级的固件
I / II
连接件类型,输入端
按键式端子
连接件类型,输出端
按键式端子
Detection angle (PIR)
-
Number of channels
1
适用于直通连接
否
Control interface
-
Detection angle (Light sensor)
-
Programming
Programming device
DIPswitch
认证与标准
认证标志 认证
CCC / CE / RCM / ENEC 05
标准
根据 IEC 61347-1标准/根据 IEC 61347-2-13标准/根据 IEC 62384标准/根据 CISPR 15标准/根据 IEC 61000-3-2标准/根据 IEC 61000-3-3标准/根据 IEC 61547标准
防护类型
IP20
防护等级
I,II
物流数据
商品编码
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
26-05-2023
Primary Article Identifier
4052899617339
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
06ee480d-1593-42d1-9ca2-8009fd63d4df
包装信息
EAN |
单位 |
件 |
尺寸 |
重量 |
音量 |
---|---|---|---|---|---|
4052899617339 |
UNV
| 1 | |||
4052899617797 |
VS
| 20 | 228mm x 208mm x 78mm | 2403.00g | 3.70dm³ |
下载更多信息
Accessories optional
全系列产品介绍
产品特点
- 独立安装用电缆卡紧套件
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
产品参数
产品 |
|
|
|
|
|
数据参数表 | ||
---|---|---|---|---|---|---|---|---|
OT FIT 20/220
240/500 CS
|
23 42 V | 250 / 350 / 450 / 500 毫安 | 97.0 mm | 43.0 mm | 29.5 mm | |||
OT FIT 30/220
240/700 CS
|
23 42 V | 500 / 600 / 650 / 700 毫安 | 97.0 mm | 43.0 mm | 29.5 mm | |||
OT FIT 40/220
240/1A0 CS
|
25 42 / 30 42 V | 800 / 900 / 950 / 1050 毫安 | 97.0 mm | 43.0 mm | 29.5 mm |