OPTOTRONIC FIT D CS L (Dip Switch) EL
产品特点
- 线路频率：0 Hz | 50 Hz | 60 Hz
- 电源电压：220至240 V
- 线路电压：198至264 V
- Wide output current range
- 使用寿命：最大 100000 小时（温度 Tc = 65°C、最大故障率为 10% 时）
产品优势
- Flexible current setting (DIPswitch – 6 currents)
- 输出电流纹波小，光线质量更好
- User flexibility with six different output currents from one driver
- 因过载、过温和短路保护而必须满足的安全要求
- 在最大允许温度下，寿命长、稳定
- Enable slim fixture design with flat 21 mm height metal housing
产品参数
| 产品 |
|
|
|
|
|
数据参数表 | ||
|---|---|---|---|---|---|---|---|---|
|
OT FIT 18/220…240/350 D CS L
|
32...54 V | 100 / 150 / 200 / 250 / 300 / 350 毫安 | 210.0 mm | 30.0 mm | 21.0 mm | ||
|
OT FIT 40/220…240/350 D CS L
|
40…120 V | 100 / 150 / 200 / 250 / 300 / 350 毫安 | 210.0 mm | 30.0 mm | 21.0 mm | ||
|
|
OT FIT 60/220…240/350 D CS L
|
90…175 V | 100 / 150 / 200 / 250 / 300 / 350 毫安 | 210.0 mm | 30.0 mm | 21.0 mm | ||
|
OT FIT 75/220...240/550 D CS L
|
90…216 / 90…188 / 90…167 / 90…150 / 90…136 V | 300 / 350 / 400 / 450 / 500 / 550 毫安 | 210.0 mm | 30.0 mm | 21.0 mm |
全系列产品介绍
应用领域
- 适合I类保护的灯具
- 按照 IEC 61347-2-13 标准附录 J 的要求安装在应急照明系统
- 适用于符合标准 EN60598-2-22 的应急照明系统中的设施
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.